|
|
 |
 |
| • SMOKE OR SPARKS APPEAR FROM SCANNING EQUIPMENT |
| • FIRE IN BUILDING |
Step
1
Halt the scan and remove the subject.
| |
A. |
Press the
EMERGENCY STOP button on the console to abort the scan |
| |
B. |
Grasp and
turn the cradle release handle, located at the foot end of
the patient bed. Pull the cradle all the way out onto the
transport table. Make certain that the cradle is fully retracted,
or it will not undock. |
| |
C. |
Move the
side rails of the table into the vertical position |
| |
D. |
Undock the
transport by stepping on the "UNDOCK" foot pedal. |
| |
E. |
Keeping
the subject on the transport, wheel the patient table out
of the scan room. |
Step 2
In case of FIRE, dial 911.
Step 3
Attempt to contact Mark
Cohen. Campus number 310/897-1690. Home number 818/225-0740,
e-mail mscohen@ucla.edu
Step 4
Page GE service engineer, Manuel Garcia (626) 835-3490 . Leave a
voice mail at (800) 525-1516 ext. 113193
Step 5
Shutdown the scanner. The procedure for doing so is located on the
last page of this manual.
Step 6
Call the UCLA Page Operator (56301 or 310/825-6301 from an off-campus
phone) and ask to page the party on call for "Brain Mapping MR Lab
emergencies"
Emergency Numbers
If you are unable to get a direct response from Mark
Cohen, the following personnel should be notified (in order).
Keep trying until one of these individuals has been reached.
|
|
|